Four rental units. Two are on the shelf now, two more are being added. Every unit is listed with its full manufacturer specification, a complete list of what ships in the case, and what it is actually good for — so there are no surprises when you open it on the job.
The workhorse of the fleet. A 200-foot mid-stiff push cable and a 25 mm self-leveling HDR camera head let you run a full commercial lateral or main, push through bends other cables fight, and come back with footage clear enough to put in a report for a building owner, a GC or a city inspector.
Plus Texas sales tax (8.25%) and delivery. Delivery is negotiable with no hard boundaries — call for rates. BOMA members receive 10% off.
Every rental goes out complete, cleaned and function-tested, and we check it back in against a written checklist so there is never a dispute about what went out. Here is what is in the case:
| Push cable length | 200 ft |
|---|---|
| Push cable diameter | 10 mm |
| Push cable stiffness | Mid-stiff — balances reach against the ability to take bends |
| Drain line capacity | 2" – 6" lines |
| Camera head | 25 mm self-leveling HDR with Sapphire Crystal lens |
| Image control | 4X digital zoom and pan |
| Pitch sensing | Yes — reads and displays pipe pitch on screen |
| Sonde | Built in — locatable with the M12™ Pipeline Locator |
| Recording | M18™ 500GB Control Hub stores photo and video on board |
| Viewing | Milwaukee® Pipeline Inspection App on your own phone or tablet, or an M18™ Wireless Monitor |
| Power | M18™ REDLITHIUM™ battery — swap packs without shutting the system down |
| Motor | Brushless |
| Weight | 37 lb |
| Dimensions | 16" L × 20.75" W × 26" H |
| Tracking | ONE-KEY™ enabled |
Manufacturer overview of the pipeline inspection system. Video hosted by Milwaukee® — nothing loads until you press play.
Finding the problem is only half the job — you still have to put an X on the ground before anybody digs. This locator pinpoints the camera's sonde from the surface and traces the energized line above it, so you can mark the dig with confidence instead of guesswork.
Plus Texas sales tax (8.25%) and delivery. Delivery is negotiable with no hard boundaries — call for rates. BOMA members receive 10% off.
Every rental goes out complete, cleaned and function-tested, and we check it back in against a written checklist so there is never a dispute about what went out. Here is what is in the case:
| Display | 4.3" daylight-readable color LCD |
|---|---|
| Antennas | Two 3D antennas — eliminate false peaks and sharpen precision |
| Sonde frequencies | 512 Hz, 640 Hz, 33 kHz |
| Line trace frequencies | 33 kHz, 83 kHz |
| Passive power frequencies | 50 Hz, 60 Hz |
| Radio mode bandwidth | 10 kHz – 22.7 kHz |
| Guidance | 360° arrow on startup, on-screen sonde icon, compass icon in line trace mode |
| Self check | Onboard calibration test monitors the tool's accuracy |
| Ingress protection | IP65 — built for wet, dirty outdoor work |
| Operating temperature | -4 °F to 122 °F |
| Power | M12™ REDLITHIUM™ battery, 12V DC |
| Weight | 5.25 lb |
| Tracking | ONE-KEY™ enabled |
We add equipment continually. If there is a tool you need and we do not carry it yet, put in a request — we will look at getting it, and a specific ask from a customer is the fastest way onto that list.
A long throw press tool is being added to the fleet for copper and stainless press fittings in tight commercial spaces. Model and jaw sizes to be confirmed.
We add equipment continually. If there is a tool you need and we do not carry it yet, put in a request — we will look at getting it.
Tell us the unit, the dates and the job location. We will confirm availability, quote delivery and send the rental agreement.
